Differences between revisions 23 and 24
| Deletions are marked like this. | Additions are marked like this. |
| Line 20: | Line 20: |
| * PB-B09 PINCAN controller, USB attached | * PB-B09 ''reserved for PINCAN'' |
Contents
PB-A...: Assemblies
- PB-A01 Service door backbox
/PB-A02 Pop bumper, purple
PB-B...: Circuit Boards
- PB-B01 Optical switch, sender board
- PB-B02 Optical switch, receiver board
/PB-B03 Microcontroller board for input/output operations
/PB-B04 (Discontinued) Serial interface driver board for PB-B03.01
- PB-B05 Solenoid driver for coils that require control through the microcontroller.
/PB-B06 (Discontinued) Lamp matrix column decoder
- PB-B07 Regulated power supply, primary 220V AC, 50Hz. Secondary 50V DC, 20V DC,12V DC, stabilized, 5V DC, stabilized.
/PB-B08 (Discontinued) Lamp matrix test board
PB-B09 reserved for PINCAN
/PB-B10 PINCAN I/O, 8 x digital output with sense input
/PB-B11 PINCAN I/O, 16 x digital output
/PB-B12 System supervisor
PB-C...: Cables and wires
/PB-C01 Serial cable, null-modem wiring, DB9 connectors.
- Used to connect PB-B03 to the main control PC.
- PB-C02 Cable assembly, 11-wire, with connectors
- Used for connection of PB-B03 with PB-B11, and PB-B11 with PB-B06s and PB-B10s.
PB-D...: CAD Drawings, Assembly plans, Manuals
- PB-D01 System overview CAD drawing
/PB-D02 Operator manual
/PB-D03 Playfield 2D CAD drawing
/PB-D04 Electrical overview
/PB-D05 I/O bus design
/PB-D06 Game rulesheet
/PB-D07 Case CAD drawing
PB-I...: Interface definitions
/PB-I01 GCC/PB-B03 serial interface specification
PB-M...: Memory
- PB-M01 2764 64K (8kb x 8) EPROM, programmed with PB-P01, for use in PB-B03.
- PB-M02 28C64 64K (8kb x 8) EEPROM, programmed with PB-P01, for use in PB-B03.
PB-P...: Programs
/PB-P01 (Discontinued) I/O control program, 80C535 microcontroller assembler.
ECOs: Engineering Change Orders
See also: PartNumberDesignators
CategoryElectronics CategoryPinball
THIS DATA IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
All product and brand names mentioned on there pages and in the source code are registered names and/or trademarks of the respective owner and are mentioned for identification purposes only.
For a full copyright notice, please see this link. For imprint and contact information, please see http://www.thiemo.net/.