When PB-B03.01 is used, use of the current revision of PB-B04 is required, minimum revision PB-B04.02.
When PB-B03.01 is used, an undocumented plug-in type construction is required to swap D1-8 and Q1-8 of IC3. Otherwise, no program will run and the board will not work.
When PB-B03.01 is used, a connection has to be soldered onto the PCB backside between pin 27 and 28 of IC2. Otherwise,
- random data corruption in program memory is likely to occur when EEPROM types (like PB-M02) are used
- programs might fail to execute correctly, or terminate unexpectedly.
PB-I01.01 (former GCC.PB-B03 interface specification 1.0) is supported by iocd with serial.c of RCS revision 1.7 or greater.
THIS DATA IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
All product and brand names mentioned on there pages and in the source code are registered names and/or trademarks of the respective owner and are mentioned for identification purposes only.
For a full copyright notice, please see this link. For imprint and contact information, please see http://www.thiemo.net/.